IMPORTANT: A ZVPro cable must be purchased separately along with the ZVPRO 610 in order to connect a component or VGA device to the full-sized DIN input. See below for Accessories and Related items.

Based on the same architecture as their big brothers (HDbridge 2000 Series encoder/modulators), ZvPro models pack powerful features into a small space. At only 1RU high and shelf or rack mountable, it takes just one ZvPro to create a digital TV channel and broadcast it throughout your entire facility.

FEATURES

Shelf or rack mount – via integral flanges or optional mounting kit

Front-Panel Color LCD – for Configuration and Status

Web-based mangement – local or remote setup and monitoring

Component/VGA input – two choices, from a full sized DIN connector:
– Hydra cables with 7 inputs (component HD video, analog and digital audio) for clean wiring, easy diagnostics and maximum flexibility
– VGA with analog audio input

Analog and Digital Audio – internally encoded and broadcast as AC-3 or MPEG1 Layer 2 Audio Encoding (varies by region)

Integrated Closed Caption support required for ADA compliance in many applications.

High power output – up to 45dBmV

Strong retention force power connector

Two year warranty

Proudly designed in Massachusetts and Built in the USA

IDEAL USES

Distribute HD video throughout your facility

Replace multiple signage players

Commercial or residential

Use existing coaxial cabling

Compatible with any HDTV

VIDEO INPUT

YPrPb or RGB Video (1 or 2 ports per model): DIN connector HDbridge end, RCA connectors for HD source

Computer VGA (Analog): HD-15 connector, 75 Ohm RGB 0 to 0.7V, Separate H and V sync

VGA Resolutions Supported: 640×480, 720×480, 800×600, 1024×768, 1152×864, 1176×664, 1280×720, 1280×768, 1280×800, 1280×960, 1280×1024, 1360×768, 1440×900 at 60 70, 72, 75, 85 Hz. 1680×1050 and 1920×1080 at 60 Hz. VGA resolutions are broadcast centered in the best vertical fit into 1920x1080p30 or 1280x720p60.

Closed Caption: EIA/CEA-608 captions accepted over composite video input

AUDIO INPUT

Analog Audio Input: 75 Ohm 0 to 0.7v at Line-level input, RCA R/W Connectors on DIN->RCA Cable, Combined 3.5mm stero connector on DIN-> VGA cable

Digital Audio: Digital S/PDIF on DIN->RCA Cable (N/A on DIN->VGA cable)

Encoding: Internally encoded into Dolby Digital AC-3 or MPEG1 Layer 2 (varies by region)

VIDEO ENCODER

Encoder Video Profile: MPEG2 HD Profile 2: ISO13818-2 MP@HL

Traffic Shaping: Variable Bit Rate

Video Transport Bit Rate: 49.76 Mbps

Video Encoding Data Rates: Variable, 10 Mbs – 24 Mbs per channel

Average Encoding Data Rate: 18 Mbs per channel

Encoding Latency: Programmable 100 msec to 400 msec

Color Profile: 4:2:0

GOP Size: 24

Video, Audio PID: Programmable

Program Information: Programmable

AUDIO ENCODER

Encoder Audio Profile: ATSC A/52, Dolby(r) Digital (AC-3) or Mpeg 2 layer 1 (varies by region)

MODULATOR / UPCONVERTER

Modulation Types: QAM 256 (ITU-T J83 Annex B) Interleaving modes: (64,2) only OR DVB-C, QAM 256 (ITU-T J83 Annex A) (varies by region)

Cable Standard: HRC, IRC or STD or User defined (varies by region)

Frequency Range: Frequency Agile from 54 to 864MHz
– 2 kHz resolution
– +/- 30 ppm accuracy
– +/- 35 ppm stability

Output Power: +45 dBmV typical

Output Level Adjust: 25 – 45 dBmV in 1dBmV steps

MER: 38 dB typical

I/Q Amplitude Imbalance: < 1% typical

Spectral Tilt: <= 1dB over 6MHz typical CONTROL / SETUP

Network interface
– 10/100 mb Ethernet via RJ45 connection
– IP address via DHCP or set by user
– HTML/Javascript served web interface for easy configuration
– Telnet connection for CLI scripting
– Easy firmware updates
– All settings saved in NV storage

Front Panel Color Display: Quickly obtain status at a glance

GENERAL

Power: 100-240VAC 50/60Hz, 36W max rated. 18W Typical consumption. IEC 60320-C14

Cooling: Internal cooling fan, Front Inlet, Rear Exhaust

Mounting: Shelf mount flange or rack ears (ordered separately) 1RU high

Enclosure Type: Metal

Enclosure Dimensions: 8″ x 10″ x 1.75″ = 20.32cm x 25.4cm x 4.445cm

System Weight: 3.1 lb (1.4 kg)

Temperature/Humidity: Operating +32F to +113F (0C to +45C) / 10% to 80%, non-condensing

Vibration: NSTA 1A in carton

MTBF: 45,000 hours

Compliance: FCC Class A, IEC60065, EN61000 (see manual for specifics), CE, RoHS

Part number: ZvPro 620-NA, ZvPro 610-NA, ZvPro 620-EU, ZvPro 610-EU

Model name: ZvPro 620, ZvPro 610

Warranty: 2 years