FREE SHIPPING for all orders over $40
FREE SHIPPING for all orders over $40
Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating, air conditioners, etc.) from anywhere. The UL-certified Shelly 1PM can control one electrical circuit of lights or appliances up to 16A remotely. Connect 110-240v AC or 24-60v DC and measure the power consumption of any appliance.
Power meteringShelly 1PM has two integrated precise power meters that allow you to measure the consumption for each channel separately. Based on your monthly limit, it can execute different actions. |
Overconsumption and overheating protectionShelly 1PM has built-in temperature sensor for overheating protection. If the PCB temperature goes above a danger level, the device will turn off. In case you want to control your consumption and spending, set your preferred daily/monthly energy use, and Shelly 2.5 will turn off the circuit immediately if it detects a higher value. |
Wide range of voltage supportShelly 1PM supports up to 110-240v AC or 24-60v DC, making it suitable for most types of Smart Home projects! Additionally, Shelly 1PM has an optional add-on for temperature, humidity, reed switch and other sensors. Hook your lights, washing machine, dryer, refrigerator, or any other old appliance that you want to control and measure remotely. |
Shelly 1PM is a small form factor smart switch with power measurement, which allows remote control of electric appliances through a mobile phone, tablet, PC, or home automation system. It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services.
Shelly 1PM can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.
It can be retrofitted into standard electrical wall boxes, behind power sockets and light switches or other places with limited space.
Shelly 1PM has embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.
Opens image in full screenOpen
Opens image in full screenOpen
CAUTION!High voltage on the add-on interface when the Device is powered!
The list above starts with the initial device status and the lowest priority. Every next state cancels the previous one.
Enlarges the table by opening it in a full screen dialogOpen
| Type | Value |
|---|---|
| Physical | |
| Size (HxWxD): | 36x41x17 mm / 1.42×1.61×0.67 in |
| Weight: | |
| Mounting: | Wall console |
| Screw terminals max torque: | 0.4 Nm / 3.5 lbin |
| Conductor cross section: | 0.5 to 1.5 mm / 20 to 16 AWG |
| Conductor stripped length: | 5 to 6 mm / 0.20 to 0.24 in |
| Shell material: | Plastic |
| Color: | Red |
| Environmental | |
| Ambient temperature: | -20 C to 40 C / -5 F to 105 F |
| Humidity | 30 % to 70 % RH |
| Max. altitude | 2000 m / 6562 ft |
| Electrical | |
| Power supply: | 110 – 240 VAC / 24 – 60 VDC |
| Power consumption: | < 1 W |
| Output circuits ratings | |
| Max switching voltage AC: | 250 V |
| Max switching voltage DC: | 60 V |
| Max switching current AC: | 16 A |
| Max switching current DC: | 10 A |
| Sensors, meters | |
| Internal-temperature sensor: | Yes |
| Wattmeter (AC) | Yes |
| Radio | |
| RF band: | 2401 – 2495 MHz |
| Max. RF power: | <20 dBm |
| Wi-Fi protocol: | 802.11 b/g/n |
| Wi-Fi Range: | Up to 30 m / 100 ft indoors and 50 m / 160 ft outdoors (Depends on local conditions) |
| MCU | |
| CPU: | ESP8266 |
| Flash: | 2 MB |
| Firmware capabilities | |
| Schedules: | 18 |
| Webhooks (URL actions): | 6 with 5 URLs per hook |
| Scripting: | No |
| MQTT: | Yes |
| CoAP: | Yes |
Enlarges the table by opening it in a full screen dialogOpen
|
Opens image in full screenOpen |
Opens image in full screenOpen |
Only logged in customers who have purchased this product may leave a review.
-20%
-20%
-64%
-50%
