Description

TimerCamera-F is a fisheye camera module based on ESP32-D0WDQ6-V3, with onboard 8MB PSRAM and 4MB Flash. It uses a 3MP OV3660 image sensor with a 120 DFOV and supports photo capture up to 2048 x 1536 resolution.

The module is designed for ultra-low-power timed image capture. Its integrated BM8563 RTC exposes an IRQ signal for device sleep and timed wake-up, allowing sleep current as low as 2A. With timed photo capture at one photo per hour, the built-in 270mAh battery can provide over one month of battery life.

TimerCamera-F supports WiFi image transmission and USB debugging. It also provides a HY2.0-4P port on the bottom for peripheral expansion, with an onboard LED status indicator and reset button for development and debugging.

Features

• ESP32-based fisheye camera module
• ESP32-D0WDQ6-V3 with 8MB PSRAM and 4MB Flash
• 3MP OV3660 image sensor
• 120 DFOV fisheye lens
• Maximum photo resolution up to 2048 x 1536
• WiFi image transmission
• Timed sleep and wake-up
• Ultra-low power design
• Built-in 270mAh battery
• Onboard LED status indicator and reset button
• Programming platforms: ESP-IDF, Arduino, UIFlow

Specifications

Interface

• USB port for debugging
• HY2.0-4P port for peripheral expansion
• Onboard LED status indicator
• Onboard reset button

Applications

• Timed photo capture
• Remote monitoring
• WiFi image transmission applications
• Cloud-based HTTP timed photo capture

Product List

• 1 x TimerCamera-F
• 1 x LEGO Adapter
• 1 x Wall-1515
• 1 x USB Type-C Cable (20cm)

Learn

The Timer Camera series uses a low-power power management solution different from CORE and StickC devices. When in use, the PWR button is used as the power button (press and hold for 2s). To turn off the device, you need to use the software API or press the reset button on the PCB. When using external power, the device will remain powered on.

Fisheye Lens vs. Standard Lens Imaging Comparison

Resources

• Official Documentation
• TimerCamera-F Schematics PDF
• ESP32-D0WDQ6-V3 Datasheet
• OV3660 Datasheet
• Camera-Tool Guide
• UIFlow Media Trans Guide
• UIFlow UART/TIMER Guide
• Timer Folder Pusher Guide
• Timer Amazon S3 Folder Pusher Guide
• TimerCamera Arduino Library
• HTTP Stream Example
• TimerCamera Series Home Assistant Integration
• TimerCamera Product Selection Table

FAQ

What image sensor does TimerCamera-F use?

TimerCamera-F uses a 3MP OV3660 image sensor.

What is the field of view?

It has a 120 DFOV fisheye lens.

What is the maximum photo resolution?

The maximum supported photo resolution is 2048 x 1536.

Does it support timed wake-up?

Yes. It integrates a BM8563 RTC that exposes an IRQ signal for sleep and timed wake-up.

What is included in the package?

The package includes 1 x TimerCamera-F, 1 x LEGO Adapter, 1 x Wall-1515, and 1 x USB Type-C cable.