FREE SHIPPING for all orders over $40
FREE SHIPPING for all orders over $40
This blue128×64OLEDmodule has anSPI/I2Cinterface for a fast data rate, and it allows you to connect to many differentdevelopment boards, includingRaspberry Pi,Arduino,STM32, and others!
With its sky blue colour, anSSD1315 driver,and an ultra-narrow bezel with an onboard voltage translator, this is a small but powerful module that you can use with many different projects!
SmallOLEDmodules are a popular option for adding a simple display to your project for monitoring data, displaying IP addresses, weather, counters or anything else you decide to code!
Be sure to check out ourtutorial showing how to use this with the Raspberry Pi Pico usingI2Cor check outTony’s article showing how to use it with a Pico andSPI!
Note: Does NOT come with a Raspberry Pi board
| OPERATING VOLTAGE | 3.3V / 5V |
| RESOLUTION | 128 64 pixels |
| COMMUNICATION INTERFACE | 4-wire SPI / I2C |
| DISPLAY SIZE | 21.74 11.18 mm |
| DISPLAY COLOUR | (C): upper yellow & lower blue; (D): white; (E): blue |
| DISPLAY PANEL | OLED |
| PIXEL SIZE | 0.15 0.15 mm |
| DRIVER | SSD1315 |
| MODULE SIZE | 26.00 26.00mm |
| RES | Reset, low active |
| DC | Data/Command selection (high for data, low for command) |
| CS | Chip selection, low active |
| CLK | Clock input |
| DIN | Data input |
| GND | Ground |
| VCC | Power (3.3V / 5V input) |
Only logged in customers who have purchased this product may leave a review.
