This is the SkyRC e3 LiPo Balance Charger that provides you with one of the easiest and cheapest ways to charger your LiPo battery. The AC input is between 100-240V and the charge indication is via 3 LEDs on the charger; when the green light comes on, you’re ready to go! This charger tales about 1.5 hours to charge a 11.1V 2200mAh battery.

Specifications:

• AC Input: 100-240V, 50-60Hz
• Battery Type: LiPo
• Cell Count: 2-3 cells
• Charge Current: 1.2A Max
• Cell Terminate Voltage: 4.2V 0.02V
• Circuit Power: 11W 10%
• Dimension: 88x57x35mm
• Weight: 103g
• Version: 2.0
• Operational mode display: via 3 LEDs

Please Note Power Cable

Depending on stock availability, this charger may be supplied with either aUK plug or an EU plug cable, as we are unable to always guarantee which plug type our manufacturer ships with.

If you require a UK plug cable, you can order one separately below:

• 13A IEC 60320 C7 (Figure-8 / Shotgun) Connector UK Plug
• 13A Cloverleaf Connector Plug UK Plug

Resources:

• SkyRC e3 balance charger manual