| Feature |
Details |
| 4G LTE |
Cat 6 up to 300 DL / 50 UL Mbps; 3G up to 42 DL / 5.76 UL Mbps |
| 3GPP Release |
Release 12 |
| SIM Switch |
2 SIM cards, auto-switch based on: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
| Status |
IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC |
| SMS |
SMS status, configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP |
| USSD |
Supports sending and reading Unstructured Supplementary Service Data messages |
| Black/White List |
Operator black/white list (by country or separate operators) |
| Multiple PDN |
Use of different PDNs for multiple network access and services |
| Band Management |
Band lock, used band status display |
| SIM Idle Protection |
Idle SIM remains unused until switched to; no data usage on the inactive SIM |
| SIM PIN Code Management |
Enables setting, changing, or disabling the SIM card’s PIN |
| APN |
Auto APN |
| Bridge |
Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough |
Router assigns its mobile WAN IP address to another device on LAN |
| Feature |
Details |
| Routing |
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing |
| Network Protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On LAN (WOL), VXLAN |
| VoIP Passthrough Support |
H.323 and SIP-ALG protocol NAT helpers, allowing proper routing of VoIP packets |
| Connection Monitoring |
Ping Reboot, Wget Reboot, Periodic Reboot, LCP, and ICMP for link inspection |
| Firewall |
Port forward, traffic rules, custom rules, TTL target customization |
| Firewall Status Page |
View all Firewall statistics, rules, and rule counters |
| Ports Management |
View device ports, enable/disable each port, toggle auto-configuration, adjust transmission speed |
| Network Topology |
Visual representation of your network and connected devices |
| DHCP |
Static and dynamic IP allocation, DHCP relay, DHCP server configuration, static leases (MAC with wildcards) |
| QoS / Smart Queue Management |
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS |
Supports >25 service providers, with manual configuration for others |
| DNS Over HTTPS |
DNS over HTTPS proxy for secure DNS resolution |
| Network Backup |
Mobile, VRRP, and wired options for automatic failover |
| Load Balancing |
Balance Internet traffic over multiple WAN connections |
| Hotspot |
Captive portal, internal/external Radius server, MAC authentication, SMS authorization, SSO, landing page, walled garden, user management, customizable themes |
| SSHFS |
Mount remote file system via SSH protocol |
| VRF Support |
Initial virtual routing and forwarding (VRF) support |
| Traffic Management |
Real-time monitoring, wireless signal charts, traffic usage history |
| Feature |
Details |
| 802.1x |
Port-based network access control client |
| Authentication |
Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal & external RADIUS user authentication, IP & login attempts block, time-based login blocking, built-in random password generator |
| Firewall |
Preconfigured firewall rules via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64 |
| Attack Prevention |
DDOS prevention (SYN flood, SSH attack, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| VLAN |
Port and tag-based VLAN separation |
| Mobile Quota Control |
Mobile data limit with customizable period, start time, warning limit, and phone number settings |
| Web Filter |
Blacklist to block unwanted websites; whitelist to specify allowed sites |
| Access Control |
Flexible control for SSH, Web interface, CLI, and Telnet access |
| SSL Certificate Generation |
Supports Let’s Encrypt and SCEP certificate generation methods |
| Feature |
Details |
| OpenVPN |
Multiple clients and a server can run simultaneously; 27 encryption methods |
| OpenVPN Encryption |
Includes DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, AES-128-GCM, AES-256-GCM, etc. |
| IPsec |
XFRM, IKEv1, IKEv2; 14 encryption methods including 3DES, AES128, AES256, AES128GCM8, AES256GCM16 |
| GRE |
GRE tunnel and GRE tunnel over IPsec support |
| PPTP, L2TP |
Simultaneous Client/Server instances; L2TPv3 and L2TP over IPsec support |
| Stunnel |
Adds TLS encryption functionality to existing clients/servers without altering the program code |
| DMVPN |
Scalable IPsec VPNs with Phase 2, Phase 3, and Dual Hub support |
| SSTP |
SSTP client instance support |
| ZeroTier |
ZeroTier VPN client support |
| WireGuard |
WireGuard VPN client and server support |
| Tinc |
Offers encryption, authentication, and compression in tunnels; Client and server support |
| Tailscale |
Provides speed, stability, and simplicity with encrypted point-to-point connections using WireGuard protocol |
| Feature |
Details |
| WEB UI |
HTTP/HTTPS access for status, configuration, firmware updates, CLI, troubleshooting, event log servers, firmware update notifications, system log, kernel log, internet status |
| FOTA |
Firmware update from server with automatic notification |
| SSH |
SSH (v1, v2) |
| SMS |
SMS status, configuration, send/read SMS via HTTP POST/GET |
| Call |
Reboot, status, mobile data on/off, output on/off, answer/hang-up with a timer |
| Email |
Receive email alerts for various service status changes |
| TR-069 |
Supports OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
| MQTT |
MQTT Broker, MQTT Publisher |
| SNMP |
SNMP (v1, v2, v3), SNMP Trap, Brute force protection |
| JSON-RPC |
Management API over HTTP/HTTPS |
| RMS |
Teltonika Remote Management System (RMS) |
| Feature |
Details |
| ThingWorx |
Monitors WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
| Cumulocity – Cloud of Things |
Monitors Device Model, Revision, Serial Number, WAN Type/IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Also supports reboot and firmware upgrade actions |
| Azure IoT Hub |
Can be configured with Data to Server to send parameters to the cloud. Supports Direct method for executing RutOS API calls, and Plug and Play integration with Device Provisioning Service for zero-touch device provisioning |
| AWS IoT Core |
Utility for interacting with AWS cloud platform, with Jobs Support for calling device API using AWS Jobs functionality |
| Feature |
Details |
| Ethernet |
4 x RJ45 ports, 10/100/1000 Mbps |
| I/Os |
1 x Digital Input, 1 x Digital Output on 4-pin power connector |
| Status LEDs |
3 x WAN type LEDs, 3 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 1 x Power |
| SIM |
2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders |
| Power |
1 x 4-pin power connector |
| Antennas |
2 x SMA for Mobile, 1 x SMA for GNSS |
| USB |
1 x USB A port for external devices |
| Reset |
Reboot/User default reset/Factory reset button |
| Other |
1 x Grounding screw |
