The Aeotec Z-Pi 7 is a 700-seriesZ-Wave gateway GPIO module designed for the Raspberry Pi. It allows you to monitor and control Z-Wave sensors, smart switches and other Z-Wave deviceswithin your chosen home automation system such as Home Assistant (along with the Z-Wave integration).

The module is powered by Series 700 and Gen7 technology utilizing SmartStart native integration and S2 security. It can be used with any home automation software that supports the Z-Wave Serial Bridge API.

Important! The Z-Pi7 uses the same port as Bluetooth on the Raspberry Pi. To use Z-Pi 7 you must deactivate Bluetooth.

Features

• Z-Wave GPIO gateway for Raspberry Pi
• Allows your Raspberry Pi (with home automation software) to run a Z-Wave network of devices
• UK/EU 868.4 Mhz Z-Wave frequency
• Fits on your GPIO pins for a compact Z-Wave gateway solution
• Compatible with Home Assistant and any home automation software that supports the Z-Wave Serial Bridge API
• Firmware/SDK updateable (see bottom of this page)
• Bluetooth must be disabled to use this product as it uses the same port/pins!

Specifications

• Name: Z-Pi 7
• Model Number: ZWA025-C (UK/EU version)
  • UK/EU frequency 868.42 Mhz
• Product Weight: 6.5g
• Total Package Weight: 20g
• UPC/EAN: 1220000016859
• Device Type: Z-Wave GPIO Controller
• Z-Wave Plus Certified: Yes
• SmartStart: Yes
• Z-Wave Chip: EFR32ZG14
• Z-Wave Version: Series 700 and Gen7
• Security: S2 native
• QR Code Inclusion: SmartStart native
• Z-Wave SDK: 7.11.0 or later
• Power Supply: GPIO DC 3,3V
• Max Operating Current: 75mA
• Sensitivity of the RF receiver:
  • TX Power: +4,8 dBm
  • RX sensitivity: -97.5 dBm
• Operating Temperature: 0C to 40C
• Storage Temperature: -20 C to 70 C
• Product Dimensions: 42 x 35 x 12 mm
• Known compatibilities:
• Tested to be compatible with Raspberry Pi 3 and up
• Operating Distance:
  • Up to 60 m / 197 ft indoor
  • Up to 200 m / 500 ft outdoors

Resources

• User Guide (also see ‘related articles’ in the sidebar)
• How to set up Z-Pi 7 with Home Assistant and ZWaveJS UI on a Raspberry Pi
• Update Z-Pi 7 with Raspberry Pi OS/Raspberry Pi

Important! The Z-Pi7 uses the same port as Bluetooth on the Raspberry Pi. To use Z-Pi 7 you must deactivate Bluetooth.

Pinout

Package Contents

• 1x Aeotec Z-Pi 7 GPIO module

Raspberry Pi not included