FREE SHIPPING for all orders over $40
FREE SHIPPING for all orders over $40
2.66 inch e-Paper Module
A 296 152 black-and-white e-paper module with SPI interface, partial refresh support, wide viewing angle, and ultra-low power paper-like display.
| Operating voltage | 3.3V / 5V |
|---|---|
| Display color | Black / White |
| Interface | 3-wire SPI / 4-wire SPI |
| Grey scale | 2 |
| Resolution | 296 152 pixels |
| Display size | 30.704 60.088mm |
| Outline dimensions | 37.0 83.5mm |
| Full refresh time | 6s |
| Partial refresh time | 0.3s |
| Refresh power | 42.4mW typ. |
| Dot pitch | 0.202 0.203mm |
| Standby current | <0.01uA |
E-paper reflects ambient light like printed paper, stays readable under lamplight or natural light, and keeps the last displayed content after power is removed.
The module uses SPI and can connect to common controller boards such as Raspberry Pi, Jetson Nano, Arduino, and STM32.
| VCC | 3.3V / 5V |
|---|---|
| GND | Ground |
| DIN | SPI MOSI |
| CLK | SPI SCK |
| CS | SPI chip select, active low |
| DC | Data / command selection |
| RST | External reset, active low |
| BUSY | Busy status output, high active |
Suitable for price tags, shelf labels, asset or equipment tags, conference name tags, industrial instruments, and low-power information displays.
Only logged in customers who have purchased this product may leave a review.
