HeyGears Reflex 2 Series Heating Scraper Heated Accessory for Stable Resin Printing

The HeyGears Reflex 2 Series Heating Scraper is a dedicated heated accessory for HeyGears Reflex 2 series resin printers. It adds smart scraper-assisted heating to help bring resin into a more stable working temperature range, reducing cold-resin viscosity issues that can affect release behavior, drainage, and print consistency.

The official HeyGears Store product page lists 68% faster resin heating, 1 C temperature control, maintained resin temperature during printing, and faster drainage for high-viscosity resins. HeyGears reports heating UltraPrint-Production PAP10 resin from 10 C to 22 C in 6 minutes, and also reports more than 24% shorter drainage waiting time in PAU20 tooling-resin testing.

For a complete Reflex 2 workflow, pair this accessory with the HeyGears UltraCraft Reflex 2 or HeyGears UltraCraft Reflex 2 Pro. Keep maintenance consumables such as the Reflex 2 Series Release Film and Reflex 2 Series Pulsing Release Film ready, and compare with HeyGears UltraPrint PAU20 Tooling Resin for high-viscosity tooling-resin workflows.

Technical Specifications

Usage Notes & Workflow Guide

• Check Compatibility First Use this accessory only with Reflex 2 and Reflex 2 Pro printers, because the official listing does not state compatibility with earlier Reflex or Reflex RS systems.
• Use for Temperature Stability Enable heating when resin temperature is below the desired working range or when high-viscosity resin needs improved flow and drainage.
• Keep Profiles Consistent Heated resin can flow and drain differently, so validate resin profiles after changing temperature, material, or room conditions.
• Maintain the Release System Heating helps resin behavior, but it does not replace normal release-film inspection, vat cleaning, and consumable replacement.
• Handle Resin Safely Wear nitrile gloves and eye protection when working around uncured resin, and keep resin away from children, pets, skin, and eyes.
• Avoid Hot-Surface Contact Let heated parts cool before direct handling, cleaning, storage, or maintenance.
• Clean Before Storage Remove resin residue according to the Reflex 2 maintenance workflow and store the accessory dry and protected from dust.
• Use Official Guidance Follow HeyGears printer prompts, safety guidance, and accessory installation instructions for the final operating procedure.

Packing List

• 1 HeyGears Reflex 2 Series Heating Scraper

FAQ

Q: Which printers is this heating scraper compatible with?
A: The official listing states compatibility with HeyGears Reflex 2 and Reflex 2 Pro 3D printers.

Q: Is it compatible with Reflex, Reflex Turbo, or Reflex RS?
A: The official page does not list those models, so it should be treated as a Reflex 2 / Reflex 2 Pro accessory unless HeyGears confirms otherwise.

Q: What does the heating scraper improve?
A: It helps maintain resin temperature, improves resin heating speed, and can reduce drainage waiting time for high-viscosity resins under the tested conditions reported by HeyGears.

Q: What heating result does HeyGears report?
A: HeyGears reports heating UltraPrint-Production PAP10 resin from 10 C to 22 C in 6 minutes, with 1 C temperature control.

Q: Does it replace release film maintenance?
A: No. Release film and pulsing-release components still need routine inspection and replacement when worn or damaged.

Q: Should slicer settings be recalibrated after using heating?
A: If temperature, resin type, or room conditions change, run a quick validation print before important jobs because resin flow and drainage can change.

Q: What comes in the package?
A: The package contains one HeyGears Reflex 2 Series Heating Scraper for Reflex 2 and Reflex 2 Pro workflows.