FREE SHIPPING for all orders over $40
Tiny whoops are great fun but until now have always had to use analogue video transmitters. However if you want to have that full DJI HD experience on a whoop quad, the ET85D is your answer. Running beefy 1105 motors, with 2″ props all in a full whoop style frame with guarded props, this quad is great for indoor digital HD FPV flying.\n
\n
\n This quad includes the pre-assembled frame with motors, ESC and FC all pre installed. A pre-soldered cable is included for the full size\n \n DJI air unit\n \n so you can simply plug it in. The\n \n Caddx Vista\n \n will require some soldering. See mounting instructions below.\n
\n
\n
\n
\n \n
\n
\n
| \n ET85D 87.6mm Frame Kit\n | \n Wheelbase: 87.6mm\n
\n Material: Carbon Fiber\n \n \n Upper Plate Thickness: 1mm\n \n \n Bottom Plate Thickness: 2mm\n \n \n Camera Angle: 15-45 Degree\n \n \n Kit Weight: 24g\n \n |
| \n F411E12A F4 Flight Controller AIO 12A ESC\n | \n Brand Name: LDRAC\n
\n Model: F411E12A\n \n \n Item Name: F4 Flight Controller\n \n \n MCU: STM32F411\n \n \n MPU: MPU6000\n \n \n Firmware Target: MATEKF411\n \n \n OSD: AT7456E, Support Betaflight OSD\n \n \n Onboard Current Senstor ( Current Scale Value 210)\n \n \n Support DSM2/X, SBUS, IBUS, Crossfire, F.Port Receiver\n \n \n Input Voltage: 2-4S Lipo\n \n \n ESC Max Current 12A Each Way\n \n \n BLheli_S 4in1 ESC, Target: G_H_30\n \n |
| \n XT1105 4250 3-4S Brushless Motor\n | \n Brand Name: LDARC\n
\n Model: XT1105\n \n \n Item Name: 1105 4250KV Motor\n \n \n Input Voltage: 3-4S Lipo\n \n \n Shaft Diameter: 1.5mm\n \n \n Mounting Hole: 9x9mm, M2\n \n \n Weight: 6.1g\n \n |
| \n 2045 2×4.5 2 Inch 4-Blade Propeller\n | \n Brand Name: LDARC\n
\n Item Name: 2045 2×4.5 2 Inch 4-Blade Propeller\n \n \n Quantity: 10 CW & 10 CCW\n \n |
| \n 5.8G 48CH 25/100/200mW FPV Transmitter\n | \n Power: 0/25/100/200mW\n
\n Working Voltage: 5V, Support IRC-Tramp\n \n \n Camera 5V Power Output CLC filter\n \n \n Antenna Use IPEX Socket\n \n |
| \n FPV Camera ( NOT Included)\n | \n NO Camera, support 19mm / 20mm Width FPV Camera\n |
| \n Receiver ( NOT Included)\n | \n NO Receiver\n |
| \n Lipo Battery ( NOT Included)\n | \n Recommend LDARC 4S 14.8V 430mAh Lipo Battery XT30 Plug\n |
\n
\n
\n Please refer to manual for full details\n
\n
\n \n
\n
\n
\n Please refer to manual for full details\n
\n
\n \n
\n
Only logged in customers who have purchased this product may leave a review.